Other Products
We have a wide array of
additional products available. While these are not a standard
part of gutter systems, these optional products can be
added to address individual needs or preferences. Please
be sure to mention any concerns or wishes to your estimator.
Black
Vinyl Pipe:
4" round corrugated in
lengths up to 100' - attached to the bottom of a downspout
to carry water away from the house. We do not bury this pipe
underground. Homeowners may cover it with pine straw or other
gardening material to conceal it.
return to
the gutter system diagram
Chimney
Caps:
Formed of aluminum, galvanized
steel or copper to fit over and cover the top of a chimney. These can be vented or non-vented. Built to individual specifications.
return to
the gutter system diagram
Conductor
Boxes:
A water collection box made
of aluminum, copper or galvanized steel used as a decorative
addition at the top of a downspout or more often where a
scupper drain comes out of a roof parapet wall or where water
is draining out of a valley where there will be no gutter.
return to
the gutter system diagram
Drain Adapters:
A black vinyl adapter that
is used to attach rectangular downspouts to round black vinyl
pipe or the pipe into an underground drain.
return to
the gutter system diagram
Fascia Board
Replacement:
1x6 or 1x8 standard or slotted;
Prepainted with a primer paint. We can paint it with your
matching paint which you supply.
return to
the gutter system diagram
Flexspouts:
A vinyl flexible, corrugated
extension that fits on the bottom of a downspout or bottom
elbow to aim water away from the house in various directions.
It can be lengthened from 26" to 55" and shaped
to curve in any desired direction.
return to the gutter system diagram
Leaf
Screens:
Expanded aluminum (or copper) drop-in screening with an edge strip that attaches to the
top front lip of the gutter with 2 stainless steel screws.
The back edge rests under the shingles. This product is approximately
95% effective and the small pieces of leaves that can infiltrate
usually wash down the downspouts. Debris may build up on
top of the screens in some instances, but the screens still
allow the gutters to function properly. Periodic cleaning
of debris off the top of the screens may be necessary. We
recommend Gutter Helmet® as
the Never Clean Your Gutters Again® solution.
return to
the gutter system diagram
Micro-CS:
Click here to view a pamphlet about Micro-CS. More information will be available soon.
Rain Chains:
A decorative way of draining
the water from the bottom of the gutter to the ground or rain barrel instead
of using downspouts. They are available in a variety of styles
and materials.
return to
the gutter system diagram
Roof
Diverters:
A prepainted piece of aluminum
bent on the roof pitch with a 2" vertical lip that will
divert water a short distance where gutter will not work.
Roof diverters should not exceed 10 feet in length.
return to
the gutter system diagram
Scupper Boxes:
A rectangular box that fits
into and through a parapet wall allowing water to drain from
the roof into a conductor box.
return to
the gutter system diagram
Splash
Blocks:
A concrete trough that is
placed under the elbow at the bottom of a downspout, which
catches the water and directs it out away from the house.
29"L x 11 ½” W x 3"D
return to
the gutter system diagram
return to top |
